Energy News Today

Huayu’s ‘HY 2000 Plus’ microinverter compatible with new era of 500W+ solar panels


Huayu New Energy, has launched its ‘HY 2000 Plus’ microinverter, which has the highest recorded power density on the market and has four (4) MPPT (Maximum Power Point Tracking) and quad-module-level monitoring as standard. Image: Huayu New Energy

Huayu New Energy, has launched its ‘HY 2000 Plus’ microinverter, which has the highest recorded power density on the market and has four (4) MPPT (Maximum Power Point Tracking) and quad-module-level monitoring as standard. Image: Huayu New Energy

PV inverter specialist, Huayu New Energy, has launched its ‘HY 2000 Plus’ microinverter, which has the highest recorded power density on the market and has four (4) MPPT (Maximum Power Point Tracking) and quad-module-level monitoring as standard. The HY-2000-Plus is also the first commercially announced microinverter that is compatible with the latest 500-580Wp high-performance large-area solar panels that are entering the global market. 

Problem

Although traditional microinverters have gained market acceptance, notably in the high-end residential markets, the biggest barrier for market growth has been the high cost per watt compared with the traditional string inverters used in residential, C&I and utility-scale PV power plants. In residential rooftop markets, concerns remain with string inverters over how to maintain a balance between cost per watt and operational safety, such as the threat of arc issues. The ongoing challenges of constantly reducing the LCOE (Levelized Cost of Electricity) lead to the need for module-level monitoring, higher power density and inverters that are compatible with large-area solar panels that have 500-580Wp performance.

Solution

The HY-2000-Plus microinverter is a cutting-edge design by Huayu New Energy for quad-module applications with a 4 MPPT design. Its power density reaches 554.05W/kg with maximum continuous output power of 2,050W, with a net weight of only 3.7kg, a new world record for microinverter power density and significantly higher than traditional microinverter capabilities, according to the company. Huayu engineers found that, to achieve better power density for microinverters, it was key to eliminate the traditional disadvantages of both string and microinverters, such as the dc input voltage needing to be low enough to assure 100% safety of the solar system. The HY-2000-Plus microinverter has a maximum dc input voltage of 60Vdc in an IP67 casing, compared to conventional string inverters with a rated dc input voltage around 200Vdc to prevent possible arc incidents. In limited rooftop space conditions, systems have to be designed to obtain as much electricity yield as possible and deploying a module-level MPPT solution in this scenario becomes a must, since where module yield is being impacted by shading, only one module is affected in the string with module-level MPPT, rather than the complete string. The HY-2000-Plus microinverter also has a start-up voltage of only 22Vdc, compared to conventional string inverters with a start-up voltage of approximately 40Vdc. This means greater electricity yield in low-light conditions such as dawn and dusk. 

Applications

Residential and C&I rooftops as well as utility-scale PV power…



Read More: Huayu’s ‘HY 2000 Plus’ microinverter compatible with new era of 500W+ solar panels

2020-06-25 15:47:00

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy
%d bloggers like this: